Insulated panels -

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FRIMETŪ BT-LM

 

 

 

 

 

 

 

Typical Applications:

Low temperature - micro-ribbed FRIMETŪ BT-LM is a range of self-supporting metal panels with state-ofthe-art PUR with a labyrinth joint for the construction of negative temperature cold storage warehouses and rooms.
The FRIMETŪ BT-LM range has been designed to provide a complete solution to the requirements of the cold storage industry, providing the following benefits: Negative temperature

 

Standard features of polyurethane insulation continuous panel for walls, ceiling thickness 200mm - 180mm -150mm - 120mm
Density: 40 +/-2 Kg/m3
 

negative temperature cold storage warehouses and rooms, Blast freezer

Technical Information   .pdf file    1 pages    186kb

FRIMETŪ TP-SM

 

 

 

 

 

 

 

Typical Applications:

Positive temperature  - micro-ribbed FRIMETŪ TP-SM is a range of self-supporting metal panels with state-ofthe-art PUR with a labyrinth joint for the construction of positive temperature cold storage warehouses and rooms.
The FRIMETŪ TP-SM range has been designed to provide a complete solution to the requirements of the cold storage industry, providing the following benefits: Positive temperature

 

Standard features of polyurethane insulation continuous panel for walls, ceiling thickness 120mm - 100mm - 80mm - 60mm.
Density: 40 +/-2 Kg/m3

 

positive temperature cold storage warehouses and rooms

 

Technical Information   .pdf file    1 pages    186kb

MONOWALLŪ

 

 

 

 

 

 

  

 

 

 Typical Applications:

Self-supporting metal panels insulated with PUR for use in industrial and commercial buildings, refrigerated rooms with positive temperature, and partitions in general.

TABLE OF SAFE SPANS
Values guaranteed with steel sheets as thick as indicated. Spans l in metres, as a function of a uniformly distributed load p (daN/m2), have been obtained from experimental data and calculated to provide a deflection limit: f <=l/200 of the span and a minimum safety coefficient that complies with the UEAtc standards for insulated panels, which have been established and are implemented by primary European Certifying Organizations.
 

Industrial and commercial buildings, refrigerated rooms, Food Processing Building

Technical Information   .pdf file    1 pages    186kb

HIPERTECŪ WALL

Product Range:

 

 

 

 

 

 

 

 

 

 

Typical Applications:

Self-supporting metal panel system insulated with Rockwool for wall and partition applications, which require a high degree of fire resistance and acoustic insulation.
The HIPERTECŪ WALL panel, manufactured in accordance with a system patented by Metecno, consists of two microribbed steel sheets, with an insulation core of orientated fibre high density Rockwool, arranged perpendicularly to the plane of the panel and positioned in strips, laid longitudinally with off-set joints and transversely compacted, in such a way as to completely fill the space between the metal facings.

Sound insulation capacity "R" [dB]

RESISTANCE TO FIRE
The fire-resistance of a product is measured by means of a furnace brought up to a temperature of more than 1000°C in accordance with a given standardised curve.

 

For additional technical information, refer to the MONOWALLŪ technical manual.
 

Industrial and commercial buildings, refrigerated rooms, Food Processing Building

Technical Information   .pdf file    1 pages    186kb 

H-WALLŪ 10M (Industrial buildings)

Product Range:

 

 

 

 

 

 

 

 

 

 

Typical Applications:

Self supporting metal panel, insulated with Rockwool, with concealed fastenings, designed for horizontal wall panelling in industrial and commercial buildings. The panel density and, in particular, the deep waved profile, of the external metal sheet give the wall good strength, while spanning from column to column.

Hence the horizontally installed panel allows saving in the secondary structures. Hence it imparts an especially innovative appearance with softer shading to the building.

As there are no secondary purlins inside the buildings, the interior walls are particularly stylish and functional. Because of the particular shape of the joint, hidden fastening are applied to the V-cut on the male edge of the outside sheet. Two screws with center distance of 30 mm should be used for each panel and each stud. Outside walls are made mounting such panels one next to the other. A sound version with a perforated internal metal sheet is also available. For additional technical information, refer to the H-WALLŪ 10M technical manual.
 

Commercial and Industrial building with Outside walls

Technical Information   .pdf file    1 pages    186kb

FrimetŪ manual install

H-WALLŪ manual install